Connection guide for ClonerAlliance UHD Pro Max

Comprehensive guide for connecting your ClonerAlliance UHD Pro Max to various devices and setting up different recording scenarios.

Basic Connection Layout

Port Overview

Port	Function
HDMI IN	Source input connection
HDMI OUT	Display output connection
USB 3.0 Type-C	PC connection for streaming
USB Host	Storage device connection
TF Card	Additional storage option
LINE IN	External audio input
LINE OUT	Audio monitoring output
MIC IN	Microphone input for commentary

Standard Setup Process

1. Video Connections

   

   • Connect HDMI source to IN port

   • Connect display to OUT port

   • Use high-quality HDMI 2.0 cables

   • Verify signal detection

2. Storage Setup

   • Choose USB or TF card storage

   • Format if necessary

   • Verify recognition

   • Check write speed

3. Audio Setup

   

   • Connect microphone if needed

   • Set up LINE IN devices

   • Configure audio monitoring

   • Test audio levels

Advanced Connections

Gaming Console Setup

Console	Special Considerations
PS5	Enable 4K output, HDR off
Xbox Series X	Configure 4K@60Hz passthrough
Nintendo Switch	Set matching TV resolution

Professional Camera Setup

1. DSLR/Mirrorless * Set clean HDMI output * Configure frame rate * Match color settings * Enable/disable overlays

2. Camcorders * Set output resolution * Configure timecode * Set aspect ratio * Match color space

PC Connection

1. Streaming Setup * Connect USB Type-C * Install drivers * Configure software * Set streaming quality

2. Direct Recording * Choose recording mode * Set compression * Configure storage * Test performance

Cable Management

Best practices:

1. Organization * Use cable ties * Label connections * Maintain proper bend radius * Secure loose cables

2. Signal Quality * Use short runs when possible * Avoid interference sources * Use quality connectors * Maintain proper spacing

Troubleshooting Connections

Common issues and solutions:

Issue	Solution
No Signal	Check HDMI cable quality
Audio Issues	Verify source audio settings
Storage Problems	Test with different device
PC Not Detecting	Update USB drivers

Connection Verification

Checklist for testing:

1. Video Signal * Check resolution * Verify frame rate * Test HDCP handling * Confirm color depth

2. Audio Signal * Test all inputs * Check sync * Verify levels * Monitor latency

3. Storage Performance * Speed test * Capacity check * File system verify * Write test

Note

Always power off devices before changing connections.

Warning

Use only the supplied power adapter to avoid damage.

For initial setup instructions, see How to set up ClonerAlliance UHD Pro Max for first-time use?.

---

« How to set up ClonerAlliance UHD Pro Max fo... Installing ClonerAlliance Helper for UHD Pro Max »