Why can’t I switch between H.264 and H.265 on ClonerAlliance UHD Pro Max?¶
Complete guide to understanding and resolving H.264/H.265 switching issues on your UHD Pro Max device.
Understanding Codec Switching¶
Basic Requirements:
Requirement |
Description |
|---|---|
Storage Device |
Must be connected and recognized |
Device State |
Not currently recording |
Button Function |
H.264/H.265 button operational |
System Status |
Normal operating mode |
Common Issues¶
Frequent problems:
Button Unresponsive * No storage connected * Recording in progress * System busy * Hardware issue
LED Behavior * No status change * Incorrect indication * Delayed response * Erratic behavior
Troubleshooting Steps¶
Check Point |
Resolution Steps |
|---|---|
Storage Connection |
Verify proper insertion |
Recording Status |
Stop any active recording |
System State |
Check operational mode |
Button Function |
Test physical response |
LED Indicator Guide¶
Understanding indicators:
Side LED States * Blue: H.264 mode * Green: H.265 mode * Off: No storage * Blinking: Processing
Status Verification * Clear indication * Stable state * Proper transition * Error signals
Resolution Process¶
Step-by-step solution:
Step |
Action |
|---|---|
Initial Check |
Verify storage connection |
System Reset |
Power cycle if needed |
Button Test |
Confirm physical operation |
Storage Verification |
Check recognition status |
Storage Requirements¶
Media specifications:
Supported Devices * USB drives * External HDDs * TF cards * Compatible formats
Format Requirements * FAT32/exFAT/NTFS * Proper allocation * Sufficient space * Write speed
Prevention Guidelines¶
Best practices:
Area |
Recommendation |
|---|---|
Storage Management |
Regular maintenance |
System Operation |
Follow proper procedures |
Button Usage |
Gentle operation |
Status Monitoring |
Regular checks |
Warning
Never switch codecs during active recording.
Note
Storage device must be connected before codec switching.
For storage details, see Storage device formatting guide for ClonerAlliance UHD Pro Max.