Contents

Does ClonerAlliance Box Pro support AV port DVD player?

Yes. There are step-by-step instructions with both texts and pictures below.

  1. You need to prepare a male-to-male RCA Cable by yourself first. Check the picture below.

https://s1.occld.com/image/ca/kb/kb_AV_cable_20220323.JPG

  1. Connect the MMI cable of ClonerAlliance Box Pro to AV port on your DVD Player via the male-to-male RCA cable.

https://s1.occld.com/image/ca/kb/kb_AV_cable2_20220323.JPG

  1. Connect the other end of MMI cable to the MMI IN port of ClonerAlliance Box Pro.

https://s1.occld.com/image/ca/kb/kb_AV_cable3_20220323.JPG

  1. Connect the “OUT” port on ClonerAlliance Box Pro to the HDMI input port on TV with an HDMI cable.

  2. Connect the USB flash drive to the “Storage” port of ClonerAlliance Box Pro.

  3. Connect the power adapter to ClonerAlliance Box Pro and then you can see pictures on your TV.

Note: After all devices are connected correctly, please switch to the proper input signal (AV) using the remote control of ClonerAlliance Box Pro or pressing the “SOURCE” button on ClonerAlliance Box Pro.

« Why the audio and video are out of sync whe... When live streaming or recording directly t... »