Setting up audio recording with ClonerAlliance UHD Pro Max

Comprehensive guide to configuring and optimizing audio recording settings for the UHD Pro Max device.

Audio Input Options

https://s1.occld.com/image/ca/kb/ca-989upm-audio-inputs.jpg

Available Inputs:

Input Type

Specifications

HDMI Audio

Up to 48kHz/16-bit PCM

LINE IN

3.5mm stereo jack

MIC IN

3.5mm mono microphone

Mixed Audio

Multiple source combination

Audio Configuration Setup

  1. HDMI Audio Setup * Source audio format * Sample rate matching * Channel configuration * Sync settings

  2. Microphone Setup * Input level adjustment * Gain control * Noise reduction * Monitor settings

  3. LINE IN Configuration * Input sensitivity * Level balancing * Stereo/Mono selection * Source impedance

Audio Mixing Options

Mix Type

Features

Live Commentary

Mic + Game/Source audio

Background Music

LINE IN + Source mix

Multi-Source

All inputs combined

Custom Mix

Adjustable input levels

Recording Quality Settings

https://s1.occld.com/image/ca/kb/ca-989upm-audio-quality.jpg

Audio Parameters:

  1. Bitrate Options * Up to 320kbps MP3 * Variable bitrate support * Quality presets * Format selection

  2. Sample Rate Settings * 44.1kHz/48kHz options * Bit depth selection * Buffer size * Latency control

Monitor Configuration

Setting up monitoring:

  1. Hardware Monitoring * Headphone output level * Direct monitoring * Latency management * Channel routing

  2. Software Monitoring * Level meters * Peak indicators * Phase correlation * Frequency analysis

Audio Synchronization

Sync Type

Configuration

HDMI Sync

Automatic timing adjustment

Manual Offset

Fine-tune delay settings

Multi-Source Sync

Input timing alignment

Recording Sync

File timestamp alignment

Advanced Audio Features

Professional options:

  1. Signal Processing * Noise gate * Compression * EQ adjustment * Limiting

  2. Channel Management * Routing matrix * Channel mapping * Balance control * Mono summing

Troubleshooting Audio Issues

Common problems and solutions:

Issue

Solution

No Audio

Check input selection

Audio Drift

Verify sync settings

Distortion

Adjust input levels

Ground Loop Noise

Use proper grounding

Best Practices

Audio recording tips:

  1. Pre-Recording * Level check * Monitor setup * Source verification * System test

  2. During Recording * Level monitoring * Peak watching * Sync verification * Quality check

Warning

Always test audio setup before important recordings.

Note

Regular maintenance ensures optimal audio performance.

For device settings, see Menu navigation guide for ClonerAlliance UHD Pro Max.