How to record videos?

How to record videos?

1. System Requirements

System Requirements

2. Install ClonerAlliance Helper

Please download the latest version of ClonerAlliance Helper from our official website: https://www.cloner-alliance.com/cloneralliance-helper/ If the following window appears during the installation process, please select “Install”, otherwise ClonerAlliance Helper will not work properly.

image1

Note:

Please don’t connect HDML-Cloner Box Pro or HDML-Cloner Box Evolve to PC before installing the software, or there will be a prompt

“Unknown USB Device”.

3. Connect

Take HDML-Cloner Box Evolve for example:

  1. Connect the video player to IN port on HDML-Cloner Box Evolve via an HDMI cable.

  2. Connect the Micro-USB to USB cable between the “TO PC” port of HDML-Cloner Box Evolve and the USB port of PC.

  3. Plug the power adapter into the power socket and plug the other end into the 5V/2A port of HDML-Cloner Box Evolve.

Tips:

  1. You can connect up to 3 video source devices by connecting them to 1 IN, 2 IN and AV/L/R IN ports respectively via cables and press the “Source” button on the remote control to switch the input signal.

  2. When HDML-Cloner Box Evolve is connected to PC successfully, the LED light will turn white.

image2

After all devices are connected properly, when you power on all devices, the Windows operating system will prompt “Found a new hardware” and install the driver automatically. Wait a while and when the prompt “Device driver software installed successfully” pops up (as shown below), run ClonerAlliance Helper on the desktop.

image3

4. Register ClonerAlliance Helper

For more details about registering ClonerAlliance Helper, click HERE to read step by step instructions.

5. Record/Capture

  1. Run ClonerAlliance Helper on your PC and play the video.

  2. Click image4 to start recording.

image5

  1. Click image6 to stop recording.

Tips:

During recording, you can click image7 to pause at anytime. When you want to resume, please click image8 to continue recording. Besides, you can click image9 to take screenshots or click image10 to capture a GIF picture.

You can click image15 to set up the duration of recording.

image16

In this window, you can set the duration of this recording, and the file name.

  1. After recording, click image12 to view the recorded video. Then you can double click the file to play back the recorded video directly.

image14